Ptec IN6430 Ionizing Gun and Controller, 20-75 PSI Air Pressure, 68KHz (8238)W

No longer available

Ptec IN6430 Ionizing Gun and Controller, 20-75 PSI Air Pressure, 68KHz (8238)W

$250 (USD)

Goleta, CA

Description

Transforming Technologies, Ptec IN6430 Ionizing Gun and Controller, 20-75 PSI Air Pressure, 68KHz (8238)W Good cosmetic condition. May be new old stock. Powers on, lights up and trigger responds to input. No further testing done. See pictures for more detail. Manufacturer: Ptec Model #/ Model: IN6430 Ionizing Gun Description: Transforming Technologies' IN6430 ionizing air gun is a superior-or static eliminating device that integrates best - in - class AC performance and ergonomic design features into a superior and affordable package. The IN6430 works twofold as a forceful blow off gun that easily removes particulate from surfaces and as a neutralizer to remove the charges responsible for the at- traction of contaminants to product surfaces. Typical AC ionizing guns require stiff and bulky high voltage (HV) cables to connect the gun to the power supply. The IN6430 integrates the air and HV cables into one, durable, easily to flex cable. (Taken from Manufacture Website). Included: Ptec Ionizing Gun Ptec Ionizing Controller Power Cord Features: Point-And-Shoot Precision Ionization Inherently Stable Ptec Technology Dense Output of High Frequency AC (68KHz) Ion Emission Single Integrated Air/Power Cable with Strain Relief Protects Cables. Ergonomic Handle Design 0.01 Micron Hollow Fiber Filter Available Applications: The IN6430 is designed to neutralize electrostatic charges in personal bench top environments, sensitive materials assembly, SMT, Electronics Assembly, Automotive packaging, clean room and laboratory environments. (Taken from Manufacture Website.) Specifications: Note* this data was taken from an online source and may not pertain to this particular model. Power Input: AC 100V~240V, 50/60Hz Power Outlet: un-fused, 0.5A or 1.0A max. Ion Emission: AC, 68KHz Balance: +/-30 volts Decay Time: 1000V-100V, < seconds @ 12" Temperature: 66-78F ( 19-25C) Humidity: 20-60% RH (non-condensing) Air Pressure: 20-75 PSI, CDA or N Indicators: Power: Green LED, Alarm: Red Controls: On/off switch Mounting: Mounting holes on controller Emitter Points: Tungsten Alloy Weight: 3 Lb Dimensions: LxWxH": 10x10x2" Sold as is with 30 day Right of Return, only pictured items included Easy return/refund for any reason Anacapa Equipment RETURNS Anacapa Equipment Brokers, Inc. (Seller) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID. SHIPPING All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID. LIMITED WARRANTY Buyer acknowledges that the equipment is being sold as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyers right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased. The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty . INDEMNITY Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (Indemnitees) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.

Specifications

ManufacturerPtec
ModelIN6430
ConditionUsed
Model #/ ModelIN6430 Ionizing Gun
ApplicationsThe IN6430 is designed to neutralize electrostatic charges in personal bench top environments, sensitive materials assembly, SMT, Electronics Assembly, Automotive packaging, clean room and laboratory environments. (Taken from Manufacture Website.)
Power InputAC 100V~240V, 50/60Hz
Power Outletun-fused, 0.5A or 1.0A max.
Ion EmissionAC, 68KHz
Balance+/-30 volts
Decay Time1000V-100V, < seconds @ 12"
Temperature66-78F ( 19-25C)
Humidity20-60% RH (non-condensing)
Air Pressure20-75 PSI, CDA or N
ControlsOn/off switch
MountingMounting holes on controller
Emitter PointsTungsten Alloy
Weight3 Lb