LabJack T7-Pro Multifunction DAQ with WiFi, Ethernet, and USB (8137)W

LabJack T7-Pro Multifunction DAQ with WiFi, Ethernet, and USB (8137)W

$525 (USD)

Goleta, CA

orCall (805)-680-7222

Description

LabJack T7-Pro Multifunction DAQ with WiFi, Ethernet, and USB (8137)W Good cosmetic condition with some signs of use. Lights up connects to USB, Ethernet and Wifi via antenna. No further testing done. See pictures for more detail. Manufacturer: LabJack Model #/ Model: T7-Pro Description: The T7-Pro combines24-bit analog inputs with convenient Ethernet or WiFi Communication interface. Contains Module IC: 6514A-RN171 Contains KCC-CRI-029-RN-171 Contains FCC ID: T9J-RN171 Sells for $600 New from manufacture Included: Labjack T7-Pro Antenna Ethernet Cord USB Cord Specifications: Note* this data was taken from an online source and may not pertain to this particular model. I/O Features 1uV noise-free analog input resolution 24-bit low-speed and 16-bit high-speed ADC 23 Digital I/O 14 Analog Inputs Watchdog system Up to 10 counters Industrial Range: (-40 to + 85C) 2 Analog Outputs (12bit 0-5V) Analog Input 14 Analog Inputs built in (16-24 Bits Depending on Speed & Device Type) Expand to 84 analog inputs with Mux80 add-on T7-Pro: 24-bit low-speed ADC (resolution as low as 1uV noise-free ) Software Configurable Resolution Settings Single-Ended Inputs (14) or Differential Inputs (7) Analog input ranges: 10V, 1V, 0.1V and 0.01V All analog input features are software programmable by configuring the Analog Input Registers High speed sampling configurable by using Stream Mode . Speeds up to 100kS/s Low Latency Sampling and Control (less than 1ms) is made easy with Command-Response Modbus messages Easy integration with sensors like thermocouples, load cells, bridges, and more ... Digital I/O 23 Digital I/O 5 PWM Outputs with individual phase control 5 Pulse Outputs with configurable number, frequency, and width 2 Frequency Inputs returning both frequency and period 2 Pulse Width Inputs measuring time spent high and low as well as duty cycle 2 Line-to-Line Inputs measuring the time between edges on 2 different lines 4 High-Speed Counters 6 Software Counters with debounce capabilities 3 Pairs of Quadrature Inputs Many of these DIO Extended Features share pins and cannot be used at the same time. See the DIO Extended Features section of the T7's datasheet Fixed Current Outputs 200 A 10 A Communication Options USB Ethernet 802.11b/g WiFi (T7-Pro only) Weight: 1 Lb Dimensions: WxDxH": 8x3x1" Sold as is with 30 day Right of Return, only pictured items included Easy return/refund for any reason Anacapa Equipment RETURNS Anacapa Equipment Brokers, Inc. (Seller) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID. SHIPPING All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID. LIMITED WARRANTY Buyer acknowledges that the equipment is being sold as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyers right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased. The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty . INDEMNITY Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (Indemnitees) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.

Specifications

ManufacturerLabJack
ModelT7-Pro
ConditionUsed
Model #/ ModelT7-Pro
Contains Module IC6514A-RN171
Contains FCC IDT9J-RN171
Industrial Range(-40 to + 85C)
T7-Pro24-bit low-speed ADC (resolution as low as
Analog input ranges10V, 1V, 0.1V and 0.01V
Weight1 Lb