New Brunswick InnOva 4335 Refrigerated Incubator Shaker, 120V, 50/60Hz (8099)W
No longer available
New Brunswick InnOva 4335 Refrigerated Incubator Shaker, 120V, 50/60Hz (8099)W
$5,000 (USD)
Goleta, CA
Description
New Brunswick InnOva 4335 Refrigerated Incubator Shaker, 120V, 50/60Hz, Ph 1 (8099)W
Fair cosmetic condition with some scuff and scratch marks that does not affect function. Powers on, buttons respond well to inputs. Successfully reaches 4C to 60C temperature range. Reaches 25 - 500 RPM limit and shakes accordingly. Temperature probe not included. Item has been decontaminated. No further testing done. See pictures for more detail.
Manufacturer: Brunswick InnOva
Model #/ Model: 4335
Description:
The New Brunswick Innova 4335 Incubator Shaker is a large-capacity environmental shaker that allows for uniform heating and motion and accurate regulation of shaking speed. This equilibration creates faster operation and allows enhanced productivity for laboratories with shaking requirements. Designed for handling greater quantities of flasks, the Innova 4335 easily holds 12 x 2 L flasks and accepts flasks up to 6 L. The 4335 shaker provides temperatures from 15C below ambient to 60C for incubation.
Shaking speeds from 25 RPM to 500 RPM on a 1 inch circular orbit. The 4335 features alarms for deviations of shaking speed and temperature outside of tolerance limits and for end of timed run (which can be from 0.1 hour to 99.9 hours). (Taken from Manufacture Website.)
Included:
Brunswick InnOva 4335 Refrigerated Incubator Shaker
Omron H5S Time Switch
18x30 Platform
(x11) Flask Insert6" Diameter
Power Cord
Specifications:
Note*
this data was taken from an online source and may not pertain to this particular model.
Shaking
Speed: 25-500 RPM
Motion: 1 inch (25.4mm) diameter circular orbit
Indication: LED Digital Electric Display, 1 RPM increments
Set point & Control: Digital adjustment with PI microprocessor control and instantaneous visual feedback
Accuracy: /- 1 RPM
Temperature:
Range: (4.0C - 60C)
Control Stability: /- 0.1C by use of PI microprocessor controller and pulse width modulation of heater
Setpoint: Digital adjustment increments within 0.1C instantaneous visual feedback
Accuracy:
/- 0.1C @ 30-40C Range
/- 0.25C for remaining range
Uniformity: Better than /- 0.25C over entire range
Chamber Dimensions: LxWxH": 35x22x13"
Timer: 0.1 Hours to 99.9 Hours
Ambient Operating Environment: 0 - 35C, 90% humidity, non-condensing
Motor: 1/8 HP, 3 phase brush-less ball bearing DC motor
Power: 120V, 50/60Hz, Ph 1, 1300 VA
Weight: 480 Lb
Dimensions: LxWxH": 44x28x37"
Shipping Weight: ~ 600 Lb
Shipping Dimensions: LxWxH": 52x36x45"
Crating
Fee: Ask For Quote
Sold as is with 30 day Right of Return, only pictured items included
Easy return/refund for any reason
Anacapa Equipment
RETURNS
Anacapa Equipment Brokers, Inc. (Seller) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID.
SHIPPING
All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost.
We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID.
LIMITED WARRANTY
Buyer acknowledges that the equipment is being sold as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyers right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.
The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty
.
INDEMNITY
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (Indemnitees) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.
Specifications
Manufacturer | Brunswick InnOva |
Model | 4335 |
Condition | Used |
Model #/ Model | 4335 |
Speed | 25-500 RPM |
Motion | 1 inch (25.4mm) diameter circular orbit |
Indication | LED Digital Electric Display, 1 RPM increments |
Set point & Control | Digital adjustment with PI microprocessor control and instantaneous visual feedback |
Range | (4.0C - 60C) |
Control Stability | /- 0.1C by use of PI microprocessor controller and pulse width modulation of heater |
Setpoint | Digital adjustment increments within 0.1C instantaneous visual feedback |
Uniformity | Better than /- 0.25C over entire range |
Timer | 0.1 Hours to 99.9 Hours |
Ambient Operating Environment | 0 - 35C, 90% humidity, non-condensing |
Motor | 1/8 HP, 3 phase brush-less ball bearing DC motor |
Power | 120V, 50/60Hz, Ph 1, 1300 VA |
Weight | 480 Lb |
Shipping Weight | ~ 600 Lb |
Fee | Ask For Quote |