MT Series MTB042 PBC Linear Actuator, Animatics Smart Motor, SM23165D (2707A)

MT Series MTB042 PBC Linear Actuator, Animatics Smart Motor, SM23165D (2707A)

$850 (USD)

Goleta, CA

orCall (805)-680-7222

Description

MT Series MTB042 PBC Linear Actuator, Animatics Smart Motor, SM23165D (2707A) w Good cosmetic condition with some signs of use. Taken from a working environment. See pictures for more detail. Manufacturer: MT, PBC Linear Model#: MTB042, SM23165D, LSK22K Linear Actuator Description: This enclosure allows these actuators to work effectively and efficiently in applications where resistance to environmental particulates is vital to optimal performance and long life. In addition, the actuator is equipped with stainless steel band-strip seals on the top of the unit, with magnetic strips to keep the seal tight, further keeping contaminates out of the unit. (Taken from manufacturer website). Features: High Acceleration, Speed & Rigidity Long Travel Length Low Friction, Noise & Vibration Strong yet Lightweight & Corrosion Resistant Included: Note* this data was taken from an online source and may not pertain to this particular model. PBC Linear MTB042 Belt-Driven Actuator Body: 1530 Size: 42 mm X 42 mm Extruded Square Body Peak Linear Thrust: 460 Newtons (103 lb) Max stroke Length: 6 meter (236.22") Belt: 16 mm wide with 14 steel cords of reinforcement Animatics CorpSM23165DSmart Motor MFG Date: 01/21/2011 Continuous Torque: 2.50 in-lb 40 oz-in 0.28 N-m Peak Torque: 4.00 in-lb 64 oz-in 0.45 N-m Nominal Continuous Power: 181 Watt No Load Speed: 10,400 RPM Continuous Current @ Nominal Power: 5.0 Amps Voltage Constance: 4.45 V/kRPM Winding Resistance: 1.0 Ohms Encoder Resolution: 4,000 Counts/Rev Rotor Inertia: 0.00099 oz-in-sec2 0.699 10-5 Kg-m2 Shaft Diameter: 0.250" 6.35 mm Rated: 48 VDC 85 DEG I SK Series LSK22K Linear Slide Kit LSK Size: 2 Coupling Size / Style: 2 Keyways Coupling Type: Bellows Rated Torque Nm (lb-in): 8 (71) Min Shaft Diameter mm (in): 6 (0.24) Max Shaft Diameter mm (in):19.05 (0.75) Coupling Stiffness 10Nm/rad (lb-ft/deg): 6.5 (84) Coupling Inertia 10kgm (lb-in):0.02 (0.07) Amin mm (in): 70 (2.75) Bmin mm (in): 70 (2.75) E mm (in): 63.5 (2.50) Apex Dynamics Backlash Planetary Gear PN023 Output Torque: T2N: 9 Nm - 423 Nm Ratios: 1 Stage: 3/4/5/7/10 2-Stage: 15/16/20/25/30/35/40/50/70/100 Low backlash 1-Stage: 8 arcmin 2-Stage: 10armin High efficiency: 1-Stage: 97% 2-Stage: 94% Dimensions: LxWxH": 65x10x3" Weight: 16 Lb Sold as is with 30day Right of Return, only pictured items included Easy return/refund for any reason Anacapa Equipment RETURNS Anacapa Equipment Brokers, Inc. (Seller) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID. SHIPPING All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost.We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID. LIMITED WARRANTY Buyer acknowledges that the equipment is being sold as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyers right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased. The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty . INDEMNITY Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (Indemnitees) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California. Save time & money with FREE Auctiva Image Hosting.

Specifications

ManufacturerMT, PBC Linear
ModelMTB042, LSK22K, PN023
ConditionUsed
TypeLinear Actuator
Body1530
Size42 mm X 42 mm Extruded Square Body
Peak Linear Thrust460 Newtons (103 lb)
Max stroke Length6 meter (236.22")
Belt16 mm wide with 14 steel cords of reinforcement
MFG Date01/21/2011
Nominal Continuous Power181 Watt
No Load Speed10,400 RPM
Continuous Current @ Nominal Power5.0 Amps
Voltage Constance4.45 V/kRPM
Winding Resistance1.0 Ohms
Encoder Resolution4,000 Counts/Rev
LSK Size2
Coupling Size / Style2
Coupling TypeBellows
Rated Torque Nm (lb-in)8 (71)
Min Shaft Diameter mm (in)6 (0.24)
Max Shaft Diameter mm (in)19.05 (0.75)
Coupling Stiffness 10Nm/rad (lb-ft/deg)6.5 (84)
Coupling Inertia 10kgm (lb-in)0.02 (0.07)
Amin mm (in)70 (2.75)
Bmin mm (in)70 (2.75)
E mm (in)63.5 (2.50)
1 Stage3/4/5/7/10
2-Stage94%
1-Stage97%
Weight16 Lb
PNLSK22K-0817