Beckman Coulter Allegra 21R Centrifuge 367570 w/ Fixed Angle Rotor F2402H (4751)

Beckman Coulter Allegra 21R Centrifuge 367570 w/ Fixed Angle Rotor F2402H (4751)

$1,250 (USD)

Goleta, CA

orCall (805)-680-7222

Description

Beckman Coulter Allegra 21R Centrifuge 367570 w/ Fixed Angle Rotor F2402H (4751) R In good cosmetic condition. Powers on, digital screen and buttons respond well to input. The lowest temperature range we were able to achieve was -5C and highest 40. Runs quietly. No further testing done. See pictures for more detail. Manufacturer: Beckman Coulter Model #: 367570 Model: Allegra 21R Centrifuge Description: The Beckman Coulter Allegra 21R is a compact refrigerated bench top centrifuge. It is great for pelleting, nucleic acid precipitation, and protein extraction. Common rotors for the Allegra 21R are the 25 Conical Fixed Angle rotor C0650 and C1015, 25 Fixed Angle F0685, F0850, F0630, and F1010, 30 Fixed Angle F0630, 45 Fixed Angle F2402H and F3602, Horizontal S4180, Biosafe Bowl H6002, and Microtiter S2096. This is the perfectcompact addition to any laboratory bench. Centrifuge can achieve maximum a 30,000RPM . This item canreach ranges of-20 to 40 C. Safety features includeAutomatic door interlock, imbalance detector, steel barrier ring around chamber, over speed detection, and over-temperature detection. (Taken frommanufacturer website.) Specifications: This data was taken from an online source and may not pertain to this particularmodel. Speed Set speed: 0 to 14 500 rpm (in 100-rpm increments) or equivalent RCF Set time: to 9 hr 59 min or continuous Time display: time remaining in run (timed run) or and elapsed time (continuous run) Electrical requirements: 50Hz,230VAC,3A;60Hz,120VAC,5A; 50/60 Hz, 100 VAC, 15 A Motor: 340 W Temperature setting: 20 to +40C (in 1C increments) Operating range: 2 to 40CF* Ambient temperature range: 10 to 35C Humidity restrictions : <95% (noncondensing) Acceleration: 10 acceleration profiles Deceleration: 10 deceleration profiles Noise Level 0.91 m (3 ft) in front on instrument: <64dBa Dimensions Width: 42 cm (16.6 in.) Depth: 64 cm (25.2 in.) Height, door closed: 38 cm (15.0 in.) Height, door open: 80 cm (31.5 in.) Weight: 70 kg (154.4 lb) Clearances (sides and rear): 7.6 cm (3.0 in.) Electrical requirements: 50 Hz, 230 VAC, 5 A 60 Hz, 120 VAC, 12 A 50/60 Hz, 100 VAC, 15 A Motor: 746 W Electrical supply : Class I Beckman Fixed Angle Rotor F2402H (Refrigerated) Max RPM: 15 300 Max RCF* ( g): 21 460 Max Capacity (mL): 24 1.0/1.5 Rotor Part Number/ Rotor Manual Number: 361171 GS-TB-021 $75 Crating Fee Sold as is with 30day Right of Return, only pictured items included Easy return/refund for any reason Anacapa Equipment RETURNS Anacapa Equipment Brokers, Inc. (Seller) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID. SHIPPING All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost.We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID. LIMITED WARRANTY Buyer acknowledges that the equipment is being sold as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyers right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased. The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty . INDEMNITY Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (Indemnitees) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.

Specifications

ManufacturerBeckman Coulter
ModelAllegra 21R Centrifuge
ConditionUsed
Modified itemNo
Speed typeHigh Speed Centrifuge
Custom bundleNo
Non-domestic productNo
Intended use/disciplineBiological Laboratory
FeaturesRefrigerated
Rotor typeFixed-Angle Rotor
Model #367570
SpecificationsThis data was taken from an online source and may not pertain to this particularmodel.
Speed Set speed0 to 14 500 rpm (in 100-rpm increments) or equivalent RCF
Set timeto 9 hr 59 min or continuous
Time displaytime remaining in run (timed run) or and elapsed time (continuous run)
Motor746 W
Temperature setting20 to +40C (in 1C increments)
Operating range2 to 40CF*
Ambient temperature range10 to 35C
Humidity restrictions<95% (noncondensing)
Acceleration10 acceleration profiles
Deceleration10 deceleration profiles
Noise Level 0.91 m (3 ft) in front on instrument<64dBa
Width42 cm (16.6 in.)
Depth64 cm (25.2 in.)
Height, door closed38 cm (15.0 in.)
Height, door open80 cm (31.5 in.)
Weight70 kg (154.4 lb)
Clearances (sides and rear)7.6 cm (3.0 in.)
Electrical supplyClass I
Max RPM15 300
Max RCF* ( g)21 460
Max Capacity (mL)24 1.0/1.5
Rotor Part Number/ Rotor Manual Number361171 GS-TB-021