Nordson Dage Series 4000PAXY Bondtester System w/ Computer BondTester (7279) R
Sold
Nordson Dage Series 4000PAXY Bondtester System w/ Computer BondTester (7279) R
$13,950 (USD)
Goleta, CA
Description
Nordson Dage Series 4000PAXY Bondtester System w/ Computer + More USED (7279) R
In great cosmetic condition. Powers on, the Dage connects to the computer and responds well to input. Input from Joysticks control the cartridge and stage. Passed all Initialization Test when software was opened. See pictures for more detail.
https://www.youtube.com/watch?
v=ut_0UVj-ty0
Manufacturer: Dage
Model #/ Model: Series 4000PAXY
Youtube Video Link:
https://www.youtube.com/watch?v=ut_0UVj-ty0
Includes:
Objective: Leica 10446320 0.75x/WD 1300mm
Eye Pieces:
20x/12 Leica 10446357 (x2)
Leica GZ6 Microscope Body
Cartridges
DS100
BS250
BS5KG
Dage ASSY-719223 Joystick Controller
Dage ASSY-719266 Keypad Joystick Controller
Computer (Win 98), Monitor, Keyboard & Mouse, Cables
Software (Installed)
Armrest for Joy Sticks
Foot Pedal
All nececarry cables
Stages (Both are different Diameters)
OD:11"
OD: 6"
Specifications: (These Specifications were taken from an online user manual and may not be accurate to this machine.)
Pneumatic Supply (for machine) 4bar, 6mm OD/4mm ID plastic pipe clean dry air
Vacuum Supply (for workholder) min. 500mm Hg plastic pipe
Axis
X, Y axis accuracy: ±10 microns over 50mm (50mm XY Table Option)
X, Y axis repeatability: ±5 microns over 50mm (50mm XY Table Option)
X, Y axis resolution <1 micron (50mm XY Table Option)
X, Y axis maximum speed: 2mm/second (50mm XY Table Option)
Y axis maximum force: 100kg (standard) (50mm XY Table Option)
X axis maximum force: 5 kg (50mm XY Table Option)
Z axis travel: 65mm
Z axis accuracy over full travel: ±10 micron
Z axis accuracy over 2mm: ±2 micron
Total stepback accuracy of complete system for 250 gram shear cartridge over 25 micron of Z travel: ±1 micron
Z axis resolution: ±0.125 micron
Z axis maximum speed: 7mm/second
Z axis maximum test speed: 5mm/second
Z axis maximum force: 10kg pull at 5mm/second
Workholder working envelope
X 220mm
Y 220mm
Z 50mm
Shipping:
Actual (WxDxH): 425 x 730 x 670mm
Actual Weight: 280lbs
Shipping Dimensions: 32x36x38"
Crating Fee: $250
Sold as is with 30 day Right of Return, only pictured items included
Easy return/refund for any reason
Anacapa Equipment
RETURNS
Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID.
SHIPPING
All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost.
We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID.
LIMITED WARRANTY
Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.
The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty
.
INDEMNITY
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.
Specifications
Manufacturer | Dage |
Model | 4000 4000PAXY |
Condition | Used |
Https | //www.youtube.com/watch?v=ut_0UVj-ty0 |
Model #/ Model | Series 4000PAXY |
Objective | Leica 10446320 0.75x/WD 1300mm |
OD | 6" |
Specifications | (These Specifications were taken from an online user manual and may not be accurate to this machine.) |
X, Y axis accuracy | ±10 microns over 50mm (50mm XY Table Option) |
X, Y axis repeatability | ±5 microns over 50mm (50mm XY Table Option) |
X, Y axis maximum speed | 2mm/second (50mm XY Table Option) |
Y axis maximum force | 100kg (standard) (50mm XY Table Option) |
X axis maximum force | 5 kg (50mm XY Table Option) |
Z axis travel | 65mm |
Z axis accuracy over full travel | ±10 micron |
Z axis accuracy over 2mm | ±2 micron |
Total stepback accuracy of complete system for 250 gram shear cartridge over 25 micron of Z travel | ±1 micron |
Z axis resolution | ±0.125 micron |
Z axis maximum speed | 7mm/second |
Z axis maximum test speed | 5mm/second |
Z axis maximum force | 10kg pull at 5mm/second |
Actual (WxDxH) | 425 x 730 x 670mm |
Actual Weight | 280lbs |
Shipping Dimensions | 32x36x38" |
Crating Fee | $250 |