Applikon Broadley James BV-C1001-15R 15L Bioreactor w/ Accessories USED (7056) R

Sold

Applikon Broadley James BV-C1001-15R 15L Bioreactor w/ Accessories USED (7056) R

$5,000 (USD)

Goleta, CA

Description

Applikon Broadley James BV-C1001-15R 15L Bioreactor w/ Accessories USED (7056) R In great cosmetic condition. Has minor scuff marks. No cables included. Did not test motor. We have many other accessories available, please ask about them if interested.. See pictures for more detail. Lazy Susan is not included. Manufacturer: Broadley James | Applikon Model: 15L Bioreactor Total Volume: 16.5 L Working Volume: 12 L Min. Working Volume: 2.5 L Overall Height: 610 mm Vessel Inner Height: 447 mm Vessel Inner Diameter: 223 mm Component Material: 316L S.S. Seal Materials: Silicone, Viton Vessel Type: Borosilicate Glass Includes: (B5-11314-015) 15 L Stand: 316L stainless steel stand for 15 liter vessels. Includes adjustable braces to stabilize the lower portion of the vessel. (B2-LS103-015-M30) Lipseal Agitator Assembly Shaft Diameter: 8 mm L-Type Sparger (Aeration Tube): To meet the oxygen demand of a culture, a sterile gas stream can be sparged through the culture, using an air-inlet pipe (B4-24002-8T9-M27) Air Outlet Condenser: Stainless steel condenser, fits into the M18 x 1.5 port (B4-42002-8T9-M27) Medium Inlet Triple: The medium inlet triple allows you to equip one head plate port with three additions (e.g. for acid, alkali and anti-foam addition) (B4-14004-015-M10) Circular Heat Exchange: This device fits into two M10 ports and allows for cooling water to be circulated through it, chilling the contents of the vessel. (B4-12003-015-M10) Thermowell: The thermowell allows you to insert a temperature probe in the reactor. Fill the thermometer pocket with water or silicone oil in order to improve thermal contact between the culture and the probe. Impeller: (B4-32005-8T9-B03) Vortex Pitched Blade (x2) + (B4-31024-8T9-B06) Rushton 6-Blade Impeller (x2) Blind Stoppers: Various sizes (See pictures for more detail.) Tubing and syringes Shipping Weight: 180lbs Shipping Dimensions: 31 x 36 x 38" It appears this item is restricted for export by the Department of Commerce under the Bureau of Industry and Security (BIS) Export Administration Regulations, EAR (15 CFR, Parts 730-774). Items that are EAR restricted may or may not require a license depending on the end user and ultimate country of destination. The item type and specifications will determine which type of license is required. It is your responsibility to know the export classifications of your item and to comply with the regulatory licensing and documentation requirements. You must file a Shipper’s Export Declaration (SED) for all exports requiring a license. All export records must be retained for a minimum period of 5 years. Exporting without a license or valid license exemption when one is required or selling to a domestic person with the knowledge that the person intends to export without a license is illegal. Please consult the BIS website at www.bis.doc.gov  for more directions. Also, please refer to eBay's Military Items Policy for additional information. Crating Fee: $75 Sold as is with 30 day Right of Return, only pictured items included Easy return/refund for any reason Anacapa Equipment RETURNS Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service.   You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent.  We DO NOT ship internationally.  If you are using a freight forwarder then returns are VOID. SHIPPING All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment.  We only charge actual shipping cost.  If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally.  IF you are using a freight forwarder then returns are VOID. LIMITED WARRANTY Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use.  The entire risk as to the quality and performance of the equipment is with the Buyer.  Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair.  Buyer may inspect the equipment prior to purchase and placement of the order.  Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect.  Buyer is responsible for determining the suitability of the equipment for its application.  Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased. The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty . INDEMNITY Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller.  The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws.  Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.

Specifications

ManufacturerBroadley James | Applikon
Model15L Bioreactor
ConditionUsed
Total Volume16.5 L
Working Volume12 L
Min. Working Volume2.5 L
Overall Height610 mm
Vessel Inner Height447 mm
Vessel Inner Diameter223 mm
Component Material316L S.S.
Seal MaterialsSilicone, Viton
Vessel TypeBorosilicate Glass
(B5-11314-015) 15 L Stand316L stainless steel stand for 15 liter vessels. Includes adjustable braces to stabilize the lower portion of the vessel.
Shaft Diameter8 mm
L-Type Sparger (Aeration Tube)To meet the oxygen demand of a culture, a sterile gas stream can be
(B4-24002-8T9-M27) Air Outlet CondenserStainless steel condenser, fits into the M18 x 1.5 port
(B4-42002-8T9-M27) Medium Inlet TripleThe medium inlet triple allows you to equip one head plate port with three additions (e.g. for acid, alkali and anti-foam addition)
(B4-14004-015-M10) Circular Heat ExchangeThis device fits into two M10 ports and allows for cooling water to be circulated through it, chilling the contents of the vessel.
(B4-12003-015-M10) ThermowellThe thermowell allows you to insert a temperature probe in the reactor. Fill the thermometer pocket with water or silicone oil in order to improve thermal contact between the culture and the probe.
Impeller(B4-32005-8T9-B03) Vortex Pitched Blade (x2) + (B4-31024-8T9-B06) Rushton 6-Blade Impeller (x2)
Blind StoppersVarious sizes (See pictures for more detail.)
Shipping Weight180lbs
Shipping Dimensions31 x 36 x 38"
Crating Fee$75