Towa FFT-1005 Compression Molding Machine System Resin FFT Series Complete 4583
No longer available
Towa FFT-1005 Compression Molding Machine System Resin FFT Series Complete 4583
$42,500 (USD)
Goleta, CA
Description
Towa FFT-1005 Compression Molding Machine System Resin FFT Series Complete 4583
c
In good cosmetic condition. Taken from a working environment. Includes many accessories, all manuals and CD's included, 500lb lift table with custom load block. See pictures for more detail.
Manufacturer: Towa
Model #: FFT-1005
Model: Manual Compression Molding Machine
Description:
This machine is the manual press (independent) version of the Towa automated compression molding system.
This system uses a liquid resin, and transports the resin into the mold.
Lower release film and FM Vacuum molding can be accommodated.
Parts Included:
Installation, Operation, MaintenanceManuals
Assembly Drawings
Circuit Wiring Diagram
User Guides
(also on two disc set)
Final Specs for Mold Chase Blocks (BHM-912-74927) & (BHD-912-74093)
Mold Instruction Manual
Complete tool sets
Feet
Various Molding Plates
Various Films
Temperature gauge included for testing
Lots of misc. Accessories and new/ used parts
Vacuum Pump Manuals
Fluon LM-ETFE Film
(1 Roll)
Grade: 50LM 380NT
Thickness: 50m
Width: 380mm
Length: 120m
( 4 Rolls)
Grade 50LM 140 NT
Thickness: 50m
Width:140mm
Length: 120m
500lb Lift Table
Manufacturer: Hydraulic Lift Tables
Model: MD0584
Raised Height: 48"
Minimum Height: 30"
18" x 18"
Has a custom load port for TOWA
Specifications:
Date Installed: 06/25/2007
Operation Mode: Manual operation (numeric key input... 1 step)
Emergency Stop: Control cabinent front and back one each.
Monitor:
Main operation screen: 15inch TFT color LCD (touchscreen)
Indication: English (SI unit).. STD spec. are English
Main Controller:
Motion Controller: JEPMC-MP2300 ... Yasukawa electric
(CPU): Program capacity 120K step
Power Voltage: DC24V 1A or more
Mass (Actual) : Approx. 2.0Ton (4000lbs)
Mass (shipping): Approx. 2.5 (5000lbs)
Working Height: 47" (1170mm)
Supply/Exhaust Duct
Flow Rate: 8m3/min 2 places
Connection: (ceiling of system) 150mm via duct 2 places protrusion of duct; 100mm
Air Supply
Air Pressure: 0.408MPa (4.0Kg/cm) or more
Supply Rate: 100 Nlit./min Clean dry air (200Nlit.min for dispenser)
Connection: Female Rc1/2
Equipped with air drop detector Set at 3.8Kg/cm2
Two Vaccum Pumps
Brand: Ulvac
Model: DIS-251 Oil Free
Hours: #1-8208.9#2-2277.6
Both pumps equipped with Ulvac Vac Pump Filters SGT-100
Electric Power Supply:
Power Supply: AC200V +-10% 50/60Hz 3 Phase
Max Consumption: 14.0kw (including dispenser unit 0.5kw)
Average Consumption (normal operation): 5.0kw (including deepener unit 0.5kw)
Control Voltage: DC30V or below
Connection: Connected to terminals Take inpos. Rear top of ctl cabinet Connect pos...Terminals inside control box
Breaker Capacity: ELCB 3P 75A
Grounding: D-type grounding
Dimensions:
Actual: 45" x 54" x 64"
(1130mm x 1370mm x 1622mm)
These dimensions do not include protruding extremities.
Shipping: (for Towa main sys)50" x 61" x 84" &
(for accessories and load table)
40" x 40" x 50"
Crating Fee: $500.00
Sold as is with 30day Right of Return, only pictured items included
Easy return/refund for any reason
Anacapa Equipment
RETURNS
Anacapa Equipment strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items must be received in the same condition as sent. We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID.
SHIPPING
All equipment purchased is shipped within one (1) day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost.
We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID.
LIMITED WARRANTY
Buyer acknowledges that the equipment is being sold as is and without any warranty of merchantability or fitness for a particular use. Buyer may inspect the equipment prior to purchase and placement of the order prior to inspection is deemed a waiver of Buyers right to inspect. Buyer is responsible for determining the suitability of this product for its application. Anacapa Equipment Brokers, Inc. assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.
The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty.
Specifications
Manufacturer | Hydraulic Lift Tables |
Model | DIS-251 Oil Free |
Condition | Used |
Model # | FFT-1005 |
Grade | 50LM 380NT |
Thickness | 50m |
Width | 140mm |
Length | 120m |
Raised Height | 48" |
Minimum Height | 30" |
Date Installed | 06/25/2007 |
Main operation screen | 15inch TFT color LCD (touchscreen) |
Date Installed | 06/25/2007 |
Operation Mode | Manual operation (numeric key input... 1 step) |
Emergency Stop | Control cabinent front and back one each. |
Main operation screen | 15inch TFT color LCD (touchscreen) |
Indication | English (SI unit).. STD spec. are English |
Motion Controller | JEPMC-MP2300 ... Yasukawa electric |
(CPU) | Program capacity 120K step |
Motion Controller | JEPMC-MP2300 ... Yasukawa electric |
Power Voltage | DC24V 1A or more |
Mass (Actual) | Approx. 2.0Ton (4000lbs) |
Mass (shipping) | Approx. 2.5 (5000lbs) |
Working Height | 47" (1170mm) |
Flow Rate | 8m3/min 2 places |
Connection | Connected to terminals Take inpos. Rear top of ctl cabinet Connect pos...Terminals inside control box |
Air Pressure | 0.408MPa (4.0Kg/cm) or more |
Supply Rate | 100 Nlit./min Clean dry air (200Nlit.min for dispenser) |
Brand | Ulvac |
Hours | #1-8208.9#2-2277.6 |
Power Supply | AC200V +-10% 50/60Hz 3 Phase |
Max Consumption | 14.0kw (including dispenser unit 0.5kw) |
Average Consumption (normal operation) | 5.0kw (including deepener unit 0.5kw) |
Control Voltage | DC30V or below |
Breaker Capacity | ELCB 3P 75A |
Grounding | D-type grounding |
Actual | 45" x 54" x 64" |
Flow Rate | 8m3/min 2 places |
Shipping | (for Towa main sys)50" x 61" x 84" & |
Crating Fee | $500.00 |
Air Pressure | 0.408MPa (4.0Kg/cm) or more |
Brand | Ulvac |
Power Supply | AC200V +-10% 50/60Hz 3 Phase |
Actual | 45" x 54" x 64" |
Grade | 50LM 380NT |
Manufacturer | Hydraulic Lift Tables |