Veeco VIC Leak Detection MS50DHS High Sensitivity Dry Helium Leak Detector 7105

Veeco VIC Leak Detection MS50DHS High Sensitivity Dry Helium Leak Detector 7105

$38,000 (USD)

Goleta, CA

orCall (805)-680-7222

Description

Veeco VIC Leak Detection MS50DHS High Sensitivity Dry Helium Leak Detector 7105 R In great cosmetic condition. Recently serviced by manufacturer, attempting to acquire service documentation. Powers on, buttons and screen respond well to input. Dual Motor. Monitor screen and software is included. This item has been recently refurbished. See pictures for more detail. See Video Here: https://youtu.be/7BGyjkkCW8U Manufacturer: VIC Leak Detection Model #: MS50DHS Model: MS50 High Sensitivity DRY (Dual Pump) Pfeiffer Mod: TC100 Edwards EXT-75DX-24VDC Drivac MPU405-N726 (This information was taken from an online Data Sheet and may not be accurate to this machine) Software Rev. 3.13 HS Sensitivity, Vacuum: 3.0 x 10e-12 Sensitivity, Sniffing: 1.0x10e-08 Leak Measuring Range: 3.0 x 10e-12 to 1.0 x 10e-15 Leak Ranging: Auto/Manual Start Up Time: <3 Min. Response Time: <2 sec. Resolution: 14 at Mass 4 Gross Test, Time (w/ UFT Option): 3 Sec. (100 mTorr) Fine Test, Time (w/ UFT Option): 10 Sec. (25 mTorr, 10e-10 atm-cc/sec) Mass Spectrometer Tube: 180 Deflection; Dual-magnetic Sector Auto-Tuning: Yes Auto-Calibration: Internal: YEs/ External: Manual Auto-Zeroing: Yes Reject set-point: Yes Built-in Calibration Leak: Yes; 10e-09 Range NIST Traceable: Yes Temperature Compensated: Yes Scan/ Descan: Yes Filaments: 2-Tungsten Maximum Operating Pressure: 7.5 Torr Direct, 760 Torr Reverse Display/Interface: 10in. (25.4cm) LCD flat panel display, capacitive touch-screen / Graphical User Interface (GUI) Units: cc/second, mbar*I/second, Pa*Me3/second I/O: 0~5V chart, parallel printer Printer Port: Yes RS-232C: Yes Software: 50 Programmable Test Recipes Vacuum Mode: Direct Roughing Pump: 10 cfm Dry Scroll Pump Foreline Pump: 5 cfm dual stage diaphragm/ molecular drag High Vacuum Pump:  61 Liters/ Second turbo pump Vacuum Gauging: Pirani: Test port & foreline/ Ion: High Vacuum Dimensions: (WxHxD) 25.75 x 30.625 x 35.25" Test Cup, UFT Option (Ø x D): 4.5 x 1" Test Port Connection: 1.125" Weight: 475 lbs. Power 115V / 50/60 Hz / 30A Includes: Power Cord (30Amp) Shipping Actual Weight: 580 lbs Actual Dimensions: 31 x 36 x 44" Shipping Dimensions: ~35 x 30 x 49" Crating Fee: $ 200 Sold as is with 30 day Right of Return, only pictured items included Easy return/refund for any reason Anacapa Equipment RETURNS Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service.   You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent.  We DO NOT ship internationally.  If you are using a freight forwarder then returns are VOID. SHIPPING All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment.  We only charge actual shipping cost.  If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally.  IF you are using a freight forwarder then returns are VOID. LIMITED WARRANTY Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use.  The entire risk as to the quality and performance of the equipment is with the Buyer.  Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair.  Buyer may inspect the equipment prior to purchase and placement of the order.  Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect.  Buyer is responsible for determining the suitability of the equipment for its application.  Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased. The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty . INDEMNITY Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller.  The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws.  Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.

Specifications

ManufacturerVIC Leak Detection
ModelMS50 High Sensitivity DRY (Dual Pump)
ConditionUsed
Model #MS50DHS
Pfeiffer ModTC100
Sensitivity, Vacuum3.0 x 10e-12
Sensitivity, Sniffing1.0x10e-08
Leak Measuring Range3.0 x 10e-12 to 1.0 x 10e-15
Leak RangingAuto/Manual
Start Up Time<3 Min.
Response Time<2 sec.
Resolution14 at Mass 4
Gross Test, Time (w/ UFT Option)3 Sec. (100 mTorr)
Fine Test, Time (w/ UFT Option)10 Sec. (25 mTorr, 10e-10 atm-cc/sec)
Mass Spectrometer Tube180 Deflection; Dual-magnetic Sector
Auto-TuningYes
Auto-ZeroingYes
Reject set-pointYes
Built-in Calibration LeakYes; 10e-09 Range
NIST TraceableYes
Temperature CompensatedYes
Scan/ DescanYes
Filaments2-Tungsten
Maximum Operating Pressure7.5 Torr Direct, 760 Torr Reverse
Display/Interface10in. (25.4cm) LCD flat panel display, capacitive touch-screen / Graphical User Interface (GUI)
Unitscc/second, mbar*I/second, Pa*Me3/second
I/O0~5V chart, parallel printer
Printer PortYes
RS-232CYes
Software50 Programmable Test Recipes
Vacuum ModeDirect
Roughing Pump10 cfm Dry Scroll Pump
Foreline Pump5 cfm dual stage diaphragm/ molecular drag
High Vacuum Pump61 Liters/ Second turbo pump
Dimensions(WxHxD) 25.75 x 30.625 x 35.25"
Test Cup, UFT Option (Ø x D)4.5 x 1"
Test Port Connection1.125"
Weight475 lbs.
IncludesPower Cord (30Amp)
Actual Weight580 lbs
Actual Dimensions31 x 36 x 44"
Shipping Dimensions~35 x 30 x 49"
Crating Fee$ 200