Waters 2690D Separations Module w/ 2487 Dual λ Absorbance Detector HPLC (7581)R

Waters 2690D Separations Module w/ 2487 Dual λ Absorbance Detector HPLC (7581)R

$10,000 (USD)

Goleta, CA

orCall (805)-680-7222

Description

Waters 2690D Separations Module w/ 2487 Dual Absorbance Detector USED (7581)R In good cosmetic condition. See pictures for more detail. Powers on, digital screen and buttons respond well to detail. Passes all initial test. Unable to navigate through the software on the computer,may need to repurchase licencing to access the program. The Bulb, Solvent Hoses, and Filters may need to be replaced. See pictures for more detail. Watch Video Here: https://www.youtube.com/watch?v=Rzj2o0uOQ18 Manufacturer: Waters Model #/ Model: 2690D | 2487 Includes: 2690D Separations Module 186271821 SD8 Syringe Assembly SCH Sampler Heater/Cooler Unit WAT270800 Column Heater WAT270852 2487 Dual Absorbance Detector WAT081110 Computer (Windows XP), Monitor, Mouse,and Keyboard Software Empower 2 Installed on Computer, Disks not included (Unable to navigate through the software,may need to repurchase licencing to access the program.) Error :"Database Connection Failed" 668000230 Waters e-SAT/IN Module Milan MIL-S800i-v2 8 Port 10/100 Switch Specifications : (These Specifications were taken from an online data sheet and may not be accurate to this machine.) 2690D Separations Module Number of Solvents: One to four Programmable Flow Rate Range: 0.000 and 0.010 to 10.000 mL/min in 0.001-mL/min. increments Typical Operating Flow Rate Range: 0.050 to 5.000 mL/min in 0.001-mL/min increments Number of Sample Vials 120 vials, configured in 5 carousels of 24 vials each No.of Sample Injections: 1 to 99 injections per vial Sample Delivery Precision Typically <0.5% RSD, 5 to 80 L. Sample Carryover <0.1% Injection Accuracy 1 L (2%), 50 L, N = 6. Standard Sample Vial: 2 mL Advanced Operations Stat runs, auto additions, auto standards Injection Volume Range 0.1 to 100 L, standard Injector Linearity >0.999 coefficient of deviation (1 to 100 L) 2487 Dual Absorbance Detector Wavelength range: 190 to 700 nm Bandwidth: 5 nm Wavelength accuracy: +1 nm Wavelength repeatability: +0.10 nm Noise, single wavelength: < +0.35 x 10-5 AU, dry cell, 254 nm, 1.0 sec. time constant (TC) Noise, dual wavelength: < +2.5 x 10-5 AU, dry cell, 254 nm / 280 nm, 2.0 sec. time constant (TC) Linearity: 5% at 2.5 AU, propylparaben, 257 nm Drift 1.0 x 10-4 AU/hour/ C at 254 nm Sensitivity setting range: 0.0001 to 4.0000 AUFS Shipping: Actual Weight: 190 lbs Shipping Dimensions (LxWxH): 2 BOXES: 1) 32 X 36 X 45" 222# 2) 20 X 19 X 17 43# Crating Fee: $250 Sold as is with 30day Right of Return, only pictured items included Easy return/refund for any reason Anacapa Equipment RETURNS Anacapa Equipment Brokers, Inc. (Seller) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID. SHIPPING All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID. LIMITED WARRANTY Buyer acknowledges that the equipment is being sold as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyers right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased. The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty . INDEMNITY Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (Indemnitees) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.

Specifications

ManufacturerWaters
Model2690D 2487 WAT270800 WAT270852
ConditionUsed
Https//www.youtube.com/watch?v=Rzj2o0uOQ18
Model #/ Model2690D | 2487
(These Specifications were taken from an online data sheet and may not be accurate to this machine.)
Number of SolventsOne to four
Programmable Flow Rate Range0.000 and 0.010 to 10.000 mL/min in 0.001-mL/min. increments
Typical Operating Flow Rate Range0.050 to 5.000 mL/min in 0.001-mL/min increments
No.of Sample Injections1 to 99 injections per vial
Standard Sample Vial2 mL
Wavelength range190 to 700 nm
Separations Module2690D
Bandwidth5 nm
Wavelength accuracy+1 nm
Number of Sample Vials120 vials, configured in 5 carousels of 24 vials each
Wavelength repeatability+0.10 nm
No. of Sample Injections1 to 99 injections per vial
Noise, single wavelength< +0.35 x 10-5 AU, dry cell, 254 nm, 1.0 sec. time constant (TC)
Noise, dual wavelength< +2.5 x 10-5 AU, dry cell, 254 nm / 280 nm, 2.0 sec. time constant (TC)
No. of Sample Injections1 to 99 injections per vial
Linearity5% at 2.5 AU, propylparaben, 257 nm
Sensitivity setting range0.0001 to 4.0000 AUFS
Actual Weight190 lbs
Crating Fee$250
Sample Delivery PrecisionTypically <0.5% RSD, 5 to 80 µL
Sample Carryover<0.1%
Injection Accuracy±1 µL (±2%), 50 µL, N = 6
Advanced OperationsStat runs, auto additions, auto standards
Injection Volume Range0.1 to 100 µL, standard
Injector Linearity>0.999 coefficient of deviation (1 to 100 µL)