Xilinx XC2V500 Virtex-II XC2V500-4FG456I IC FPGA 264 I/O 456 FBGA (8333)I
Xilinx XC2V500 Virtex-II XC2V500-4FG456I IC FPGA 264 I/O 456 FBGA (8333)I
$85 (USD)
Available quantity: 360
Goleta, CA
orCall (805)-6364334
Description
Xilinx XC2V500 Virtex-II XC2V500-4FG456I IC FPGA 264 I/O 456 FBGA (8333)I
New, OLD STOCK (2001). In excellent cosmetic condition. Close up photo of chip is provided, please see pictures for detail. Sealed bag was opened briefly for photos then resealed afterwards. These came from a large well known local thermal camera manufacturer.
Manufacturer
Model
Includes
:
Virtex-II ($125 per chip)
Specifications
These specifications were taken from the manufacturers website
)
Summary of Virtex-II Features
These features are directly from the Xilinx Data Sheet, available online from the manufacturers website)
Industry First Platform FPGA Solution
IP-Immersion Architecture
- Densities from 40K to 8M system gates
- 420 MHz internal clock speed (Advance Data)
- 840+ Mb/s I/O (Advance Data)
SelectRAM Memory Hierarchy
- 3 Mb of dual-port RAM in 18 Kbit block SelectRAM resources
- Up to 1.5 Mb of distributed SelectRAM resources
High-Performance Interfaces to External Memory
- DRAM interfaces
SDR / DDR SDRAM
Network FCRAM
Reduced Latency DRAM
- SRAM interfaces
SDR / DDR SRAM
QDR SRAM
- CAM interfaces
Arithmetic Functions
- Dedicated 18-bit x 18-bit multiplier blocks
- Fast look-ahead carry logic chains
Flexible Logic Resources
- Up to 93,184 internal registers / latches with Clock Enable
- Up to 93,184 look-up tables (LUTs) or cascadable 16-bit shift registers
- Wide multiplexers and wide-input function support
- Horizontal cascade chain and sum-of-products support
- Internal 3-state bussing
High-Performance Clock Management Circuitry
- Up to 12 DCM (Digital Clock Manager) modules
Precise clock de-skew
Flexible frequency synthesis
High-resolution phase shifting
- 16 global clock multiplexer buffers
Active Interconnect Technology
- Fourth generation segmented routing structure
- Predictable, fast routing delay, independent of fanout
SelectIO-Ultra Technology
- Up to 1,108 user I/Os
- 19 single-ended and six differential standards
- Programmable sink current (2 mA to 24 mA) per I/O
- Digitally Controlled Impedance (DCI) I/O: on-chip termination resistors for single-ended I/O standards
- PCI-X compatible (133 MHz and 66 MHz) at 3.3V
- PCI compliant (66 MHz and 33 MHz) at 3.3V
- CardBus compliant (33 MHz) at 3.3V
- Differential Signaling
840 Mb/s Low-Voltage Differential Signaling I/O (LVDS) with current mode drivers
Bus LVDS I/O
Lightning Data Transport (LDT) I/O with current driver buffers
Low-Voltage Positive Emitter-Coupled Logic (LVPECL) I/O
Built-in DDR input and output registers
- Proprietary high-performance SelectLink Technology
High-bandwidth data path
Double Data Rate (DDR) link
Web-based HDL generation methodology
Supported by Xilinx Foundation and Alliance SeriesDevelopment Systems
- Integrated VHDL and Verilog design flows
- Compilation of 10M system gates designs
- Internet Team Design (ITD) tool
SRAM-Based In-System Configuration
- Fast SelectMAP configuration
- Triple Data Encryption Standard (DES) security option (Bitstream Encryption)
- IEEE 1532 support
- Partial reconfiguration
- Unlimited reprogrammability
- Readback capability
0.15 m 8-Layer Metal Process with 0.12 m High-Speed Transistors
1.5V (VCCINT) Core Power Supply, Dedicated 3.3V VCCAUX Auxiliary and VCCO I/O Power Supplies
IEEE 1149.1 Compatible Boundary-Scan Logic Support
Flip-Chip and Wire-Bond Ball Grid Array (BGA) Packages in Three Standard Fine Pitches (0.80 mm, 1.00 mm, and 1.27 mm)
Sold as is with 30day Right of Return, only pictured items included
Easy return/refund for any reason
RETURNS
Anacapa Equipment Brokers, Inc. (Seller) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID.
SHIPPING
All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost.
We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID.
LIMITED WARRANTY
Buyer acknowledges that the equipment is being sold as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyers right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.
The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty
.
INDEMNITY
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (Indemnitees) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.
Specifications
Condition | New |
Series | Virtex-II |
Number of labs/clbs | 768 |
Total ram bits | 589824 |
Number of i/o | 264 |
Number of gates | 500000 |
Voltage - supply | 1.425V ~ 1.575V |
Mounting type | Surface Mount |
Operating temperature | -40C ~ 100C (TJ) |
Package / case | 456-BBGA |
Supplier device package | 456-FBGA (23x23) |
Base product number | XC2V500 |
Manufacture year | 2001 |