Xenon RC-847 UV/VIS Pulsed Light Curing System, RC-800, RC-847, LH-840 (6939)
No longer available
Xenon RC-847 UV/VIS Pulsed Light Curing System, RC-800, RC-847, LH-840 (6939)
$11,400 (USD)
Goleta, CA
Description
Xenon RC-847 UV/VIS Pulsed Light Curing System, RC-800, RC-847, LH-840 + Extras (6939)R
In great cosmetic condition. Powers on, display and switches respond well to input. Light inside the housing turns on. No seals on the door are present, and must be replaced. Danger from UV and Ozone Exposure. Only properly trained personal should operate. The Red Vice Clamp in the pictures is NOT included. See pictures for more detail. READ AND UNDERSTAND INDEMNITY AND LIMITED WARRANTY (Verify through ebay messages)
Manufacturer: Xenon
Model: Pulsed Light Curing System
XenonS-1000 Benchtop Sintering System
Specifications:
User Controls
Mains voltage ON/OFF]
High voltage ON/OFF
Manual flash trigger mode OFF/CONT/BURST
Continuous flash trigger mode START/STOP
Lamp operating voltage
Spiral Lamp: 2.85 KV - 3.80 KV
Linear Lamp: 2.25 KV - 3.80 KV
Programmable timer 1-999 seconds in 1 second interval
Pulsed Light Power output to flash lamp 2300 Joules/second, max
Pulse rate 1.8 pulses/second max, factory set
Pulse duration 520 s
Dose:Spiral Lamp: 4.0 J/cm2 Linear Lamp: 4.9 J/cm2
Pulse energy safe operating range Spiral Lamp: 465-830 Joules/pulse Linear Lamp: 290-830 Joules/pulse
Controller Cooling Internal fan, continuous ON
Power Input 40.64 cm x 274.3 cm (16 x 108)
Controller 1-phase 200-240 Vrms50/60 Hz30 amps max
Mains power cord 2.4 meters (8 feet)
Controller Outline Dimensions (HxWxL) 226 x 480 x 706 mm (8.8 x 18.9 x 27.8)
Controller Weight 39 kg (87 pounds)
Includes: RC-800 Module
XenonUV Lamp Housing W/ Steri Chamber
Model: LH-840
Linear Lamp Housing The LH-840 linear lamp housing provides a curing area of 1.9 x 30.5 cm (0.75 x 12). The flash lamp is mounted inside the housing with provisions for external air cooling.
Steri Chamber Part Number: 860-0105
Access Door Hinged; 18" x 6" (457.2 x 152.4 mm)
Material Metal grade stainless steel with clear passivate overcoat
Disinfecting Methods Note 4 Door Interlock High
Voltage disabled at controller when chamber door open
Chamber interlock cable 2-foot (0.6 meters)
Mains Power Cord 7-foot (2.1 meters)
Outline Dimensions 11.61" x 30.5" x 16.0" (294.9 x 774.7 x 406.4 mm) (H x W x D)
Voltage (internal fan)
Weight 200-240 Vrms (10%), (50/60 Hz), single phase, 3 amperes 57 pounds (25.9 kg)
Includes
: Extra UV Bulb (See pictures for more detail)
Blower Kit w/ Dayton Industrial Motor
Specifications:
Model: 6K197BB
Hp: 1 Hz: 60
V115/208-230 PH: 1
RPM: 3450
Code: K
Amps: 11.8/6.3-5.9 SF: 1
Includes
: Aluminum Ducting (See pictures for more detail.)
International Light Radiometer
Model ILT1700
Measurement Range:0.2 picoAmps to 200 milliAmps (Optical units will depend on sensor selection).
Minimum display resolution is 0.01x10-11Amps.
Linearity:0.1%, 1 digit on the top 8 decades of measurement range and 0.2%, 1 digit on the bottom 2 decades
Refresh Rate:2 readings/second (options for 4 or 8 readings/second available)
Power:90-130/180-240 VAC, 50-60 Hz, 8-15 VDC external or 6 internal "C" cell NiCad rechargeable batteries
Size:5.3 inches x 8.7 inches x 9.4 inches (90 mm x 220 mm x 240 mm)
Weight:5.1 pounds (2.3 kg)
Includes
: Instruction Manual, ILT1700-USB (Instrument Driver), Power Cord, SED033W#13693, SED240 W#13737 Sensors.
Crating Fee: $400
Sold as is with 30day Right of Return, only pictured items included
Easy return/refund for any reason
Anacapa Equipment
RETURNS
Anacapa Equipment Brokers, Inc. (Seller) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID.
SHIPPING
All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost.
We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID.
LIMITED WARRANTY
Buyer acknowledges that the equipment is being sold as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyers right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.
The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty
.
INDEMNITY
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (Indemnitees) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.
Specifications
Manufacturer | Xenon |
Model | 6K197BB |
Condition | Used |
Spiral lamp | 2.85 KV - 3.80 KV |
Linear lamp | 2.25 KV - 3.80 KV |
Includes | RC-800 Module |
Steri chamber part number | 860-0105 |
Instruction Manual, ILT1700-USB (Instrument Driver), Power Cord, SED033W#13693, SED240 W#13737 Sensors. | |
V115/208-230 ph | 1 |
Rpm | 3450 |
Code | K |
Measurement range | 0.2 picoAmps to 200 milliAmps (Optical units will depend on sensor selection). |
Linearity | 0.1%, 1 digit on the top 8 decades of measurement range and 0.2%, 1 digit on the bottom 2 decades |
Refresh rate | 2 readings/second (options for 4 or 8 readings/second available) |
Power | 90-130/180-240 VAC, 50-60 Hz, 8-15 VDC external or 6 internal "C" cell NiCad rechargeable batteries |
Size | 5.3 inches x 8.7 inches x 9.4 inches (90 mm x 220 mm x 240 mm) |
Weight | 5.1 pounds (2.3 kg) |
Crating fee | $400 |