Avtech Electro Systems AVM-1-C-N-PN-OT High Speed Pulse Generator (8358)I

No longer available

Avtech Electro Systems AVM-1-C-N-PN-OT High Speed Pulse Generator (8358)I

$750 (USD)

Goleta, CA

Description

Avtech Electro Systems AVM-1-C-N-PN-OT High Speed Pulse Generator (8358)I In good cosmetic condition. This unit is used, it powers on, no further testing could be done. See pictures for more detail. Manufacturer : Avtech Model : AVM-1-C-N-PN-OT AVM Series AVM-1 Options/Features: C: Stand-alone lab instrument with internal clock and line powering N-PN: Dual Polarity OT: Internally generated DC offset option (0 to 5 V, one turn control) Includes : Power Cable AVM-C Unit Specifications : ( These specifications were taken from the manufacturer's online manual and may not be specific to this item ) Amplitude (into 50 Ohm load): Variable to 5 Volts Pulse width (FWHM): Variable to 0.2 to 6 ns PRF: 0 to 25 MHz (-C units & modules, externally triggered) 3 kHz to 25 MHz (-C units, internally triggered) Rise time (20% - 80%): = 100 ps Fall time (80% - 20%): = 135 ps (typically 100 ps) Polarity: Positive or negative or both (specify) Propagation delay: = 30 ns (Ext trig in to pulse out) Variable propagation delay option: 0 to 5 ns Jitter: 15 ps (Ext trig in to pulse out) DC offset or bias insertion: Apply required DC offset to back panel solder terminals ( 50 Volts, 250 mA max) Trigger required: Modules, and -C ext trig mode: TTL-level8 (Low: 0V, High: +3V to +5V), 10 ns or wider. = 1 kO input impedance. Sync delay: Sync out to pulse out, -C units only: Variable 0 to 85 ns Sync output: (-C only) Approximately 20 ns wide and 0.5V in amplitude. Logically complemented (i.e., LOW +0.5V, HIGH 0V). Will drive 50 Ohm loads. Monitor output option: Provides a 20 dB attenuated coincident replica of main output Connectors: -C units: Out, Monitor: SMA, Trig, Sync: BNC, Modules: In, Out: SMA, Power: Solder terminals Dimensions (H x W x D): -C units: 100 x 215 x 375 mm (3.9 x 8.5 x 14.8) Modules: 43 x 66 x 107 mm (1.7 x 2.6 x 4.2) Power requirement: -C units: 100 - 240 V, 50 - 60 Hz. AVM-1 & AVM-2 modules: +24V DC. AVM-3 modules: +28V DC. Chassis material: -C units: anodized aluminum, with blue plastic trim. Modules: cast aluminum, blue enamel Temperature range: +5C to +40C Dimensions : Actual Dimensions (LxWxH): 12 x 7.5 x 4" Actual Weight: 8 lbs Sold as is with 30day Right of Return, only pictured items included Easy return/refund for any reason Anacapa Equipment RETURNS Anacapa Equipment Brokers, Inc. (Seller) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID. SHIPPING All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID. LIMITED WARRANTY Buyer acknowledges that the equipment is being sold as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyers right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased. The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty . INDEMNITY Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (Indemnitees) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.

Specifications

ConditionUsed
(
CStand-alone lab instrument with internal clock and line powering
N-pnDual Polarity
OtInternally generated DC offset option (0 to 5 V, one turn control)
Amplitude (into 50 ohm load)Variable to 5 Volts
Pulse width (fwhm)Variable to 0.2 to 6 ns
Rise time (20% - 80%)= 100 ps
Fall time (80% - 20%)= 135 ps (typically 100 ps)
PolarityPositive or negative or both (specify)
Propagation delay= 30 ns (Ext trig in to pulse out)
Variable propagation delay option0 to 5 ns
Jitter15 ps (Ext trig in to pulse out)
Dc offset or bias insertionApply required DC offset to back panel solder terminals ( 50 Volts, 250 mA max)
Sync output(-C only) Approximately 20 ns wide and 0.5V in amplitude. Logically complemented (i.e., LOW +0.5V, HIGH 0V). Will drive 50 Ohm loads.
Monitor output optionProvides a 20 dB attenuated coincident replica of main output
Temperature range+5C to +40C
Actual dimensions (lxwxh)12 x 7.5 x 4"
Actual weight8 lbs