Harvard Apparatus PHD Ultra Syringe Pumps 70-3310 w/ Heater + RS-485 Remote 5690

No longer available

Harvard Apparatus PHD Ultra Syringe Pumps 70-3310 w/ Heater + RS-485 Remote 5690

$5,000 (USD)

Goleta, CA

Description

Harvard Apparatus PHD Ultra Syringe Pumps 70-3310 w/ Heater + RS-485 Remote 5690c For Research Only, NOT for use on Patients In good cosmetic condition. Powers on, touch screen responds to all commands, heater controller powers up and responds to push button commands, syringe pump powers up, unable to test further. See pictures for more detail. Manufacturer: Harvard Apparatus Model #: 70-3310 Model: Micro Syringe Type Extruder Includes: RS-485 Remote Syringe Extruder PHD Ultra 70-3310 Box of Die (see pictures for more detail.) Description: This equipment has been designed for extruding small quantities of hot polymers, for the purpose of making small strands or fibers, utilizingthe basis of the Harvard Syringe Pump for precise flow control. The Extruder can extrude on any angle from the vertical plane to the horizontal plane. Specifications: (These specifications were taken from an online user manual and may not be accurate to this product.) Accuracy 0.35% Reproducibility 0.05% Syringes (Min./Max.): 0.5 l / 140 ml* Flow Rate: Minimum (0.5 l syringe): 3.06000 pl/min Maximum (140 ml syringe): 216.005 ml/min Display: 4.3 WQVGA TFT Color Display with Touchscreen Non-Volatile Memory: Stores all settings Connectors: RS-232: 9 pin D-Sub Connector RS-485: IEEE-1394, 6 pos USB: Type B I/O & TTL: 15 pin D-Sub Connector Linear Force (Max): 200 lbs @ 100% Force Selection Drive Motor: 1.8 Stepper Motor Motor Drive Control Microprocessor controlled with 1/16 microstepping Number of Microsteps per one rev. of Lead Screw: 6,400 Step Rate: Minimum 27.5 sec/step Maximum 52 sec/step Pusher Travel Rate: Minimum 0.36 m/min Maximum 190.80 mm/min Power 100-240 VAC:50-60 Hz 50 W, 0.5 A fuse Dimensions Control Box 12 x 8.5 x 7.25 in (30.48 x 21.59 x 18.4 cm) 12 x 8.5 x 4.25 in (30.5 x 21.6 x 10.8 cm) Remote Box: 11.75 x 5.5 x 7 in (29.8 x 13.9 x 17.8 cm) Actual Weight: 55 lbs Sold as is with 30day Right of Return, only pictured items included Easy return/refund for any reason Anacapa Equipment RETURNS Anacapa Equipment Brokers, Inc. (Seller) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID. SHIPPING All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID. LIMITED WARRANTY Buyer acknowledges that the equipment is being sold as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyers right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased. The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty . INDEMNITY Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (Indemnitees) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.

Specifications

ManufacturerHarvard Apparatus
ModelMicro Syringe Type Extruder
ConditionUsed
Model #70-3310
Specifications(These specifications were taken from an online user manual and may not be accurate to this product.)
Syringes (Min./Max.)0.5 l / 140 ml*
Intended use/disciplineBiological Laboratory
Minimum (0.5 l syringe)3.06000 pl/min
Maximum (140 ml syringe)216.005 ml/min
Display4.3 WQVGA TFT Color Display
Non-Volatile MemoryStores all settings
RS-2329 pin D-Sub Connector
RS-485IEEE-1394, 6 pos
USBType B
I/O & TTL15 pin D-Sub Connector
Linear Force (Max)200 lbs @ 100% Force Selection
Drive Motor1.8 Stepper Motor
One rev. of Lead Screw6,400
Power 100-240 VAC50-60 Hz
Remote Box11.75 x 5.5 x 7 in (29.8 x 13.9 x 17.8 cm)
Weight55 lbs