Atlantic Blowers AB-2102 ABPK-2102 Regenerative Blower 30 HP 1519 CFM
No longer available
Atlantic Blowers AB-2102 ABPK-2102 Regenerative Blower 30 HP 1519 CFM
$7,500 (USD)
Goleta, CA
Description
Atlantic Blowers AB-2102 ABPK-2102 Pressure Kit Regenerative Blower w/ Silencers (6948) R
In great cosmetic condition. Under 1 Hour use. Sells for $22,000 NEW. Scuff marks on the Pressure Filter Canister and External Silencers. Unable to test. The cart is optional and doesn't affect the price. See pictures for more detail. Includes Pressure Kit, Silencers, Cart, Square D Safety Switch, Frequency Drive, 5" Piping, Relief Valve, Pressure Filter Canister and Element
"Three Phase/Double Stage Regenerative
Blower
can be used for various pressure or vacuum applications."
Manufacturer: Atlantic Blowers
Model #/ Model: ABPK-2102
Regenerative Blower with Pressure Kit& Silencers
Specifications:
Max. Flow (CFM): 1519
Max. Pressure (inches H2O): 64
Max. Vacuum (inches H2O): 76
Rated Voltage: 230/460 V
Phase: 3
Horsepower: 30.00
Rated Freq: 50/60 Hz
Rated Effy: 92.4%
INS Class: F
Rated Curr: 87.0/48.0 A
Includes:
Variable Frequency Drive
Model: GK3000-4T0300G
Capacity: 40 hp (30 kW)
Dimension: 500*296*276 mm
Rated current: 60 A
Input voltage: 3 phase 230V /420V /480V AC 15% (Optional)
Input frequency: 50Hz/ 60Hz
Output voltage: 3 phase AC 0~input voltage
Output frequency: 0.00~400.00Hz
Over load capacity: 150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control mode V/F control; Sensorless vector control;
Communication: RS485
Speed regulation: 1:100
Start torque: 150% of rating torque at 1 Hz
Speed control accuracy: 0.5% of rating synchronous speed
Frequency precision: Digital setting: max frequency x 0.01%;
Analog setting: max frequency x 0.2%
Frequency resolution: Analog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boost: Automatic torque boost, manual torque boost 0.1%~30.0%
Interior PID: controller Be convenient to make closed-loop system
Automatic energy save running: Optimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR): Can keep constant output voltage when power source voltage varies.
Automatic current limiting: Limit running current automatically to avoid frequent over-current which will cause trip
Enclosure rating: IP 20
Temperature: 10~ +40 ; VFD will be derated if ambient temperature exceed 40; each rise 1, the derate will be 5%
Humidity: 5%-95%, without condensation
Altitude: 1000m; VFD will be derated if above 1000m
Impingement and oscillation: Normal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment: 20~ +60; no dust, no corrosive gas, no direct sunlight
Uline H-61 Welded Platform Truck
Relief Valve AB-20007 5.00" Diameter(Online Price: $1300)
Pressure Filter Element AB-EP10007 5.00" Diameter
Pressure Filter Canister AB-10007 5.00" Diameter
External Silencer AB-40007 5.00" Diameter (x2)
5.00" Piping for Pressure
Square D Safety Switch
Shipping Dimensions
Total Weight (lbs): 950
LxWxH (in): 46 x 46 x 37"
Crating Fee: Ask For Quote
Sold as is with 30day Right of Return, only pictured items included
Easy return/refund for any reason
Anacapa Equipment
RETURNS
Anacapa Equipment Brokers, Inc. (Seller) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID.
SHIPPING
All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost.
We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID.
LIMITED WARRANTY
Buyer acknowledges that the equipment is being sold as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyers right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.
The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty
.
INDEMNITY
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (Indemnitees) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.
Specifications
Manufacturer | Atlantic Blowers |
Model | GK3000-4T0300G |
Condition | Used |
Model #/ Model | ABPK-2102 |
Max. Flow (CFM) | 1519 |
Max. Pressure (inches H2O) | 64 |
Max. Vacuum (inches H2O) | 76 |
Rated Voltage | 230/460 V |
Phase | 3 |
Horsepower | 30.00 |
Rated Freq | 50/60 Hz |
Rated Effy | 92.4% |
INS Class | F |
Rated Curr | 87.0/48.0 A |
Capacity | 40 hp (30 kW) |
Dimension | 500*296*276 mm |
Rated current | 60 A |
Input voltage | 3 phase 230V /420V /480V AC 15% (Optional) |
Input frequency | 50Hz/ 60Hz |
Output voltage | 3 phase AC 0~input voltage |
Output frequency | 0.00~400.00Hz |
Over load capacity | 150% of rated current for 1 minute, 180% of rated current for 3 seconds |
Communication | RS485 |
Start torque | 150% of rating torque at 1 Hz |
Speed control accuracy | 0.5% of rating synchronous speed |
Analog setting | max frequency x 0.2% |
Digital setting | 0.01Hz |
Torque boost | Automatic torque boost, manual torque boost 0.1%~30.0% |
Interior PID | controller Be convenient to make closed-loop system |
Automatic energy save running | Optimize V/F curve automatically based on the load to realize power save running |
Automatic voltage regulation (AVR) | Can keep constant output voltage when power source voltage varies. |
Automatic current limiting | Limit running current automatically to avoid frequent over-current which will cause trip |
Enclosure rating | IP 20 |
Temperature | 10~ +40 ; VFD will be derated if ambient temperature exceed 40; each rise 1, the derate will be 5% |
Humidity | 5%-95%, without condensation |
Altitude | 1000m; VFD will be derated if above 1000m |
Store environment | 20~ +60; no dust, no corrosive gas, no direct sunlight |
Relief Valve AB-20007 5.00" Diameter(Online Price | $1300) |
Total Weight (lbs) | 950 |
LxWxH (in) | 46 x 46 x 37" |
Crating Fee | Ask For Quote |