Commscope Heliax FSJ4-50B Cable, F4PNMV2-HC Connectors Type N Male 1/2″ NEW 6989
No longer available
Commscope Heliax FSJ4-50B Cable, F4PNMV2-HC Connectors Type N Male 1/2″ NEW 6989
$270 (USD)
Goleta, CA
Description
Heliax FSJ4-50B Cable, F4PNMV2-HC Commscope Connectors Type N Male 1/2 LOT 6989 R
In great cosmetic condition. Each Cable is 6' long. Lot of 9 total. See pictures for more detail.
Manufacturer: Heliax Commscope
Model #: FSJ4-50B /F4PNMV2-HC
Model: Coaxial Cable w/ Type N Connectors
Lot of 9 TOTALcables
Each Cable is 6 Ft Long
Coaxial Cable
Product Classification
Brand: HELIAX | SureFlex
Product Series: FSJ1-50A
Product Type: Coaxial wireless cable
Construction Materials
Jacket Material: PE
Outer Conductor Material: Corrugated copper
Dielectric Material: Foam PE
Flexibility: Superflexible
Inner Conductor Material: Copper-clad aluminum wire
Jacket Color: Black
Dimensions
Nominal Size: 1/4 in
Cable Length: 0 km
Cable Weight: 0.05 lb/ft | 0.07 kg/m
Diameter Over Dielectric: 4.826 mm | 0.190 in
Diameter Over Jacket: 7.366 mm | 0.290 in
Inner Conductor OD: 1.9050 mm | 0.0750 in
Outer Conductor OD: 6.350 mm | 0.250 in
Electrical Specifications
Cable Impedance 50 ohm 1 ohm
Capacitance 24.2 pF/ft | 79.4 pF/m
dc Resistance, Inner Conductor 3.000 ohms/kft | 9.843 ohms/km
dc Resistance, Outer Conductor 2.200 ohms/kft | 7.216 ohms/km
dc Test Voltage 1600 V
Inductance 0.200 H/m | 0.061 H/ft
Insulation Resistance 100000 Mohmskm
Jacket Spark Test Voltage (rms) 5000 V
Operating Frequency Band 1 18000 MHz
Peak Power 6.4 kW
Velocity 82%
Commscope Connector Type N
Mechanical and Electrical Specifications
Connector Impedance: 50 ohm.
Operating Frequency Band: 0 12000 MHz.
Cable Impedance: 50 ohm.
3rd Order IMD, typical: -120 dBm @ 910 MHz.
3rd Order IMD Test Method: Two +43 dBm carriers.
RF Operating Voltage, maximum (vrms): 707.00 V.
dc Test Voltage: 2000 V.
Outer Contact Resistance, maximum: 0.30 mOhm.
Inner Contact Resistance, maximum: 2.00 mOhm
Insulation Resistance, minimum: 5000 MOhm.
Average Power: 0.6 kW @ 900 MHz.
Peak Power, maximum: 10.00 kW.
Insertion Loss, typical: 0.05 dB.
Shielding Effectiveness: -110 dB.
Inner Contact Attachment: Captivated.
Outer Contact Attachment: Crush-Flare.
Length: 2.13 (54 mm).
Diameter: 0.94 (23.8 mm).
Torque Wrench: 468172.
Prep: 476607.
Fits: FSJ4-50B.
VSWR: 1.10.
Outer Contact Plating: Trimetal.
Attachment Durability: 25 cycles.
Interface Durability: 500 cycles.
Connector Retention Tensile Force: 890 N | 200 lbf
Connector Retention Torque: 5.42 N-m | 48.00 in lb.
Sold as is with 30day Right of Return, only pictured items included
Easy return/refund for any reason
Anacapa Equipment
RETURNS
Anacapa Equipment Brokers, Inc. (Seller) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID.
SHIPPING
All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost.
We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID.
LIMITED WARRANTY
Buyer acknowledges that the equipment is being sold as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyers right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.
The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty
.
INDEMNITY
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (Indemnitees) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.
Specifications
Manufacturer | Heliax Commscope |
Model | Coaxial Cable w/ Type N Connectors |
Condition | New |
Model # | FSJ4-50B /F4PNMV2-HC |
Brand | HELIAX | SureFlex |
Product Series | FSJ1-50A |
Product Type | Coaxial wireless cable |
Jacket Material | PE |
Outer Conductor Material | Corrugated copper |
Dielectric Material | Foam PE |
Flexibility | Superflexible |
Inner Conductor Material | Copper-clad aluminum wire |
Jacket Color | Black |
Nominal Size | 1/4 in |
Cable Length | 0 km |
Cable Weight | 0.05 lb/ft | 0.07 kg/m |
Diameter Over Dielectric | 4.826 mm | 0.190 in |
Diameter Over Jacket | 7.366 mm | 0.290 in |
Inner Conductor OD | 1.9050 mm | 0.0750 in |
Outer Conductor OD | 6.350 mm | 0.250 in |
Connector Impedance | 50 ohm. |
Operating Frequency Band | 0 12000 MHz. |
Cable Impedance | 50 ohm. |
3rd Order IMD, typical | -120 dBm @ 910 MHz. |
3rd Order IMD Test Method | Two +43 dBm carriers. |
RF Operating Voltage, maximum (vrms) | 707.00 V. |
Dc Test Voltage | 2000 V. |
Outer Contact Resistance, maximum | 0.30 mOhm. |
Inner Contact Resistance, maximum | 2.00 mOhm |
Insulation Resistance, minimum | 5000 MOhm. |
Average Power | 0.6 kW @ 900 MHz. |
Peak Power, maximum | 10.00 kW. |
Insertion Loss, typical | 0.05 dB. |
Shielding Effectiveness | -110 dB. |
Inner Contact Attachment | Captivated. |
Outer Contact Attachment | Crush-Flare. |
Length | 2.13 (54 mm). |
Diameter | 0.94 (23.8 mm). |
Torque Wrench | 468172. |
Prep | 476607. |
Fits | FSJ4-50B. |
VSWR | 1.10. |
Outer Contact Plating | Trimetal. |
Attachment Durability | 25 cycles. |
Interface Durability | 500 cycles. |
Connector Retention Tensile Force | 890 N | 200 lbf |
Connector Retention Torque | 5.42 N-m | 48.00 in lb. |